2510
2.5-inch Wood Chipper
-
Wood chipping capacity up to 2.5-inch
-
Featuring a mighty, professional-grade 13.9 ft-lbs KOHLER CH395 9.5HP engine with quad-season air filter.
-
All steel thick gauge chipper box.
-
Transmission clutch for easy starts and better engine shock load protection.
MSRP $2,899.99
$2,499.99
+ FREE SHIPPING
2510 FEATURES
Powered by Kohler CH395 9.5HP Engine
The Yardbeast 2510 is powered by a hefty Kohler Command Pro with 9.5HP of plenty of power to get through wood branches up to 2.5 inches in diameter. All-seasons air filter.
Wide Chipping Hopper
The side hopper allows chipping wood branches up to 2.5 inches in diameter. The bolted pattern makes the hopper easily replaceable by wear and tear and better resists impact.
Easy to Maintain and Change Blades
The blade on 2510 is the ultimate chipping blade. Made out of D2 Tool Steel grade, this blade will deliver many working hours between resharpening.
Heavy-Duty Clutch
A heavy-duty centrifugal clutch transmits power from the engine to the rotor. The clutch engages up from 1,800 RPM and protects the engine from sudden chipping stalls.
Wagon Kit Style
The top hopper is designed to shred copious amount of leaves, it can also reduce twigs to 0.75 inches in diameter. The top cover can be opened up to allow better access to the hopper.
Compact Design
The 2510 is designed to be convenient for moving the chipper from the house to the work area and has a small footprint if you are string it in the garage.
TESTIMONIALS
As the title says, it's a Beast. I mounted it on a small trailer because of the terrain here in North Georgia. Starts easily and chipped up a jack pine with tons of acorns and green needles. I used the metal cage it came in as a sawhorse to mill logs on with another metal crate I had. I mounted a tire changer to the pallet and used wheels for a solar wagon. Great machine and a great shipping pacakaging.
EDWARD C. / GEORGIA
It is built of heavier gauge steel than most chippers with similar features. Not advertised as self-feeding it actually does self-feed branches when there are only small side twigs that hang up in the chute. Even branches with many smaller side branches will go thru this chipper with only slight extra pushing.
The high discharge chute makes it easy for the chips to go right into my wheeled garbage can and I can easily pull it around to where the branches are lying since it is built on four wheels like a wagon. The Subaru engine starts on the first pull as long as you remember to turn the gas, choke and switch on I usually forget!
The only complaint I have is the assembly instructions are poor both text and pictures. The Beast came in a steel and wood crate. Counting uncrating and assembly took me about 2 hours. Don't forget to put oil in the engine. It is shipped dry. Oh, and the steel and wood crate when flipped over make a nice work table!
JIM F. / KENTUCKY
QUICK FACTS
CHIP BRANCH UP TO 2.5"
WAGON STYLE
232 LB
(142 KG)
D2 TOOL
STEEL BLADE
