YARDBEAST 2050RST Wood Chippers

This is our YARDBEAST 2050RST Wood Chipper Shredder with CONVIMAX discharge conveyor and ATV Trailer. Offered for people who needs to clear down branches in more than 1-acre in extension, and is a must to pull different accesories -chipper included- with their ATV or garden tractor with a beefier engine of course.

The trailer with the 17" wheels and robust frame, is able to tackle most of the uneven terrain out there, and the 30" axle span lets the trailer gain superior stability during major bumps.

The Convimax makes sure the wood chips are discharged up to a height of 44" into a discharge trailer - available upon request- or compost areas. The engine , a 10HP Briggs & Stratton and the chipper's heavy rotor, will make sure there is plenty of power and inertia to spend on some good chipping time.

Available upon request you can order the Yardbeast 2050RX with ATV trailer only.

The rotor is a tri-plate rotor configuration ideal for withstanding continuos peaks of stress. The shaft has been upgraded to 1" to minimize fatigue and stress.

The rotor comes with 10 FULLSHRED flails, that performs great when shredding dry or wet material. The rotor is also equipped with hardened blades to chip material up tp 3" in diameter.

Weighing at approximately 32 lbs. It's one of the heaviest, best performing rotors on the market with plenty of inertia to tackle the toughest jobs out there.

Our discharge auger - Convimax- is a mechanically powered attachment to automate the placing of the processed material into a discharge bin, container.

The Convimax carries up the material to a height of 44" at a average speed of 3 ft/s . This unique device saves time after finishing heavy mulching sessions where you may process up to 50-100 lbs of material. Picking the result up, bagging and carrying along with the machine could become a rather tedious homework.

Full Specifications:

Chipping capacity: 3" (76mm)

Shredding capacity: 1/2" (13mm)

Engine: 10 HP Briggs & Stratton Engine

Transmission: Hilliard Extreme Duty Centrifugal clutch / V-belt transmission

Flails: 10 heat treated sharp FULLSHRED

Blades: 2 Heat treated blades

Wheels: 17" trailer wheels

ATV+Garden Tractor Trailer

Convimax auger discharge

Discharge speed: Up to 3ft/s discharge speed

Convimax can be cleaned up in approx. 1 minute

Discharge height: 44"(1100mm) height of discharge

Screen: 7/8" diam-hole pattern screen

Housing construction: 10-gauge, All Bolted fabrication

Maintenance: Dismountable front cover for full access to cutting chamber.

Weight: 335 lbs. total weight

Warranty: 2-year limited warranty /90 day commercial